We ship via UPS, DHL, or USPS depending on the shipment. If you need a specific carrier, email us before ordering—we’re happy to accommodate when possible. Yes, we’ve shipped General Delivery to Yosemite and Joshua Tree many times.
International Orders
Standard international shipping can be slow and may take several weeks.
Tracking may not update all the way to final delivery on non-express shipments.
Standard international orders ship via DHL.
Express international orders ship via FedEx.
International orders ship Delivered Duties Unpaid (DDU). Any applicable duties or tariffs are due upon delivery. All shipping charges are prepaid at checkout.
We stand behind our gear
If something isn’t working for you, reach out and we’ll make it right. We design and use this equipment ourselves, and we want it working properly in your system.
Contact us anytime at support@avantclimbing.com
Get a comfortable catch when you whip, even while lead rope soloing!
The Comfort Catch absorber is a stiff rubber link that stretches under load, giving a ramped impact that is much more comfortable than the spike of dynamic rope absorption alone. The eyelets clip into locking carabiners while still leaving space for a limiter sling.
Available in Compact (pairs with 60cm sling for 33cm [13 inches] of travel) or Plush (pairs with 90cm sling for 51cm [20 inches] of travel).
Painstakingly optimized through many geometry and material revisions, these rubber absorbers add off-the-shelf convenience to your LRS absorber assembly by matching standard length PPE limiter slings. We tried a dozen engineering rubber grades, chose the best-performing for both stretch and dampening, and optimized the shape for a minimal package. See the instructions link below for our recommended gear assembly.
*0kN - Not PPE*
Non-structural absorber to be used in parallel to a PPE System. Not intended to reduce impact force on marginal anchors.
Recommended Number of Absorbers by Climber Weight: *The Absorbers are sold as individual links. Below is a very rough estimate for stiffness calibration, assuming falls near the anchor with minimal rope drag. Rope drag will quickly dominate in absorption effects, negating the need for perfect calibration*
Compact (60cm Sling) - Best for minimal adventures -1 Absorber: scenarios with significant rope drag -2 Absorbers: climber less than 160lb (73kg) -3 Absorbers: climber greater than 160lb (73kg)
Plush (90cm Sling) - Best for daily crag usage -1 Absorber: scenarios with significant rope drag -2 Absorbers: climber less than 180lb (82kg) -3 Absorbers: climber greater than 180lb (82kg)
Key Features:
Pairs with Standard Length Limiter Slings
We optimized the absorber length to use standard PPE sling lengths as limiters. With just the right stretch, you get the maximum absorption for the minimal material weight, without risking breakage, even in repeated falls.
Extremely Durable
Go LRS cragging and whip all day long without fear of abrading or wearing out these absorbers. No protective sheath or cover required.
Modular for Tuning based on Pitch Characteristics
It is easy to add or remove absorbers from your assembly based on pitch characteristics - are you going to fall close to the anchor? Follow the calibration recommendations. Do you expect to fall higher up with rope drag? Remove an absorber for a more comfortable catch.
I got two of these but only use one on my system as per photo... Its such a nice catch.. I'm 63kg and two of them don't even stretch much when I fall so I'm good with one. I went with the back up fall arrester but just use rope now as it was too bulky to stick clip and the rope is more than enough. Wouldn't leadsolo without this product.
Used for lead sport and trad rope solo. Havent taken a fall on them yet, but after watching avant and hownot2 vids im sure my body will appreciate the set up when I finally whip.
I had a great experience with the seller. Due to a confusion, I ordered only one absorber, and when I ordered the second unit, the seller was very kind and waived my shipping costs. The material seems to be of very good quality, and I've already tested it on a track. I'm very happy with it.
So comforting to know that a low-altitude fall on a rigid ground-anchor won’t strain gear more than necessary. I climb more freely knowing it’s built into my LRS system!
I’m enjoying the comfort these give me in relation to falling close to the anchor, I’ve wanted to try a bungee before but never found the time to try and make one.
Im so happy that Avant has taken that time for me and created this cool product.
The build quality is up there with the other Avant products I’ve purchased and the delivery, packaging and communication were excellent also 🙂👍.
I took 2 hard LRS falls just above the first bolt and they were NOT fun! So I was very excited when Avant came out with the comfort catch absorber (I own all the LRS/TRS related products and they make my solo escapades a lot more safer and enjoyable). Got to play with it today, and I recommend it wholeheartedly, it is very streamlined, and seems to work great for my weight
Great Invention!
For my weight (75 naked) i find 2 are still quite hard on the first 4 bolts and one is to soft. When i fell on a single one it gave me a nice catch but it streched a lot and took a long time to shrink again, so i got a bit scared to damaged it if using one alone.
Definitly worth for my 15m home crack routes but i think i wouldn't bring them on a multipitch, also not the short ones. (But i climb multipiches way below my singepitch grade)
Good concept and effective if you are not intimo free diving..A Speargun rubber band of the right thickness tied in between a slack section of rope by 2 Alpine butterfly knots will give similar results easily reducing 25kg or more from the shock load before rope gets tight.
Store owner replied:
Hey Oliver, be sure to check the instructions page (link below)! The steel carabiner is in addition to the aluminum lockers at either end of the bungee assembly. This allows enough space for the yellow SuperClip to fit onto that chunky steel biner.
-Brent
https://avantclimbing.com/blogs/instructions/comfort-catch-lrs-absorber-instructions
whith this gear i can work hard piches, thank you so much